So to test it all out with my machine I downloaded the latest version of Mythbuntu (8.04.1) and installed it onto my external hard drive. There are then a few step I had to go through before I could run myth-backend setup:
1) After restarting from the CD to the hard drive, I added the following line to the bottom of /etc/sources.list (open terminal, type 'sudo nano /etc/sources.list'):
deb http://ppa.launchpad.net/paul-kcbbs/ubuntu hardy mainRead More
Then run:
'sudo apt-get update'
'sudo apt-get upgrade'
That will require confirmation and run for a while, after which the machine will be up-to-date with Paul's patches installed.
2) I have a Nova T 500, and according to it's wiki page it requires a cold reboot to be detected. Before this is done though, add the folowing to /etc/modprobe.d/options:
#enable LNA
options dvb-usb-dib0700 force_lna_activation=1
#disable 2nd tuner suspend
options usbcore autosuspend=-1
Now you are ready to run mythbackend setup and configure the tuners, sources etc. Also a guide will need to be setup somehow, I havn't got around to that yet.
With the configuration basically as above, I scanned in the digital channels to test out performance. With my 2.4GHz single core I could watch just TV1 and TV2, it would start skipping on fast moving scenes. TV3 was a no go.
From here, I plan on swap the CPU and graphics card out and put in my 5200+ X2. With a little bit more tweaking to get dual core being helpful (thanks to the mythtvnz list) hopefully I can get all the channels working. If I can do that, and get a guide loaded for all channels on my test setup I will do a reinstal and move everything over to Mythbuntu :)
Uni holidays are next week so this will be on the backburner with a very busy last week, will post again when I test things further.
No comments:
Post a Comment